D Link WiFi Extender Not Working After Firmware Update?

If your D Link WiFi extender is not working after the firmware update then it can be due of any one of the following reasons:

  • Updated the wrong firmware version for the extender model you have
  • The firmware update process left incomplete
  • Sudden power outdated during the firmware update process

That’s all! Now, let us provide you with fixes to troubleshoot the “D Link WiFi extender not working after firmware update” issue. Let’s start over!

Fix 1: Download the Correct Firmware Version

Chances are that you haven’t downloaded the correct firmware version as per the extender model you own and that is giving you issues. So, what you can do to download the correct firmware version? Well, either navigate to dlinkap. local setup wizard or download the d link app.

See also  Why Finding the Right Bottle Cap Torque Tester Matters

By downloading the d link app or navigating to dlinkap.local setup wizard – you will get complete instructions to update the correct firmware version as per the D Link extender model you have.

Fix 2: Complete the Firmware Update Process

The firmware update process might take a longer time than expected. So, we suggest you have patience. Do not interrupt the firmware update process. Do not click on any link, close your range extender, or do anything online. Once the firmware process on your WiFi range extender gets updated, your D Link device will start automatically.

Fix 3: Check the Power

Make sure that – while updating the firmware on your D Link WiFi range extender, continuous power is being provided to your device. Here, I am sharing my personal experience with you – what I have been through.

See also  Is A Diploma In Computer Programming Worth It?

I also opted for a D Link WiFi extender. So, I performed the d link wifi extender setup successfully. After configuring my extender, I got a notification to update its firmware. But, what happened – during the firmware update process – suddenly there was a power outage. I didn’t notice because I have an inverter. That little fluctuation (when the power was gone and the inverter got active) in the electricity corrupted the firmware update file.

Sudden power outages aren’t in our hands. But, all we have to do is to be vigilant. It took two hours for the power to get back. Once the power got back, I tried again to perform the firmware update process. But, the file got corrupted. People also searching for Mbc2030 and Wpc15 

See also  The Technologies Pushing Business Forward

So, what I did:

  • I reset my D Link extender. For this, I disconnected my router, PC, laptop, mobile devices, etc. from the extender’s WiFi. Then, I located the reset hole on my extender and pressed it using a paper clip. After that, I held the extender’s reset hole for a couple of seconds and released it.

When my extender got reset:

  • I performed d link wifi extender setup process again by navigating to dlinkap.local setup wizard and follow the on-screen instructions. But, for a successful configuration of the extender, make sure to have the correct web address and login credentials. If you want complete information regarding the extender’s default web address and login details, I suggest you see its manual.

Note: dlinkap.local setup wizard can be used for both – updating the extender’s firmware and setting it up.

  • I Downloaded the D Link app.
  • And then, updated the new firmware version on my extender.
See also  You're Never Fully Protected Using iMessage

This time, I got success! As soon as the latest version of firmware got downloaded on my D Link WiFi extender, it got restarted automatically.

But, I suggest not using public or neighboring WiFi for updating D Link extender firmware. The reason is, there is a lot of traffic on the public WiFi networks. And, due to heavy traffic – you won’t be able to get an uninterrupted internet connection, resulting in firmware update failure or D Link WiFi extender not working after the firmware update. So, use your WiFi only to make things work smoothly.

Can I hope that my personal experience here helped you out to fix “D Link WiFi extender not working after firmware update” issue? Please share your feedback with me via comments.

See also  You're Never Fully Protected Using iMessage

Latest

The 5 Best Zapier Alternatives for Automating Your Workflow

Whether you're a solopreneur or a part of a larger team, automating your workflow is a simple way to save time and streamline your...

What Are The Causes Of Water Damage And Why Should You Not Neglect It?

If the walls of your room turn dark or the paint becomes bubbly and then falls off, take it as an indication of water...

When should you start buying Baby Items the Guide to Buying Baby Stuff?

When should you start buying Baby Items the Guide to Buying Baby Stuff? Have you recently discovered you're expecting? 

7 Steps to Increasing Your Women’s Gummy Intake

Do you want to increase your intake of women's gummy vitamins but don't know how? Are you looking for an easy guide on how...

Wisconsin Card Sorting Test – the game that develops the mind

Card sorting tests have a long tradition in psychology. And if we talk contractually about the Wisconsin Card Sorting Test,