How to apply wall putty & its precautions

The walls of your home can be full of cracks and holes. They may even be full of uneven surfaces. This means that if you apply wall paint on them without the smooth polish of the uneven surfaces, holes and cracks, the wall paint will not be applied successfully. In turn, the walls will look unappealing, rough and dry. That is why experts suggest to apply wall putty. 

Wall putty is the process of cementing the walls White to create an even surface. They are also used to fill the cracks and holes that may be present on the wall. As such, wall putty makes the wall smoother and ready for paint. In turn, the walls receive better protection against molds and cracks. 

Let us learn more about this as we read.

How To Apply Wall Putty?

• Before you begin, determine if your surface is a plaster wall or drywall. If it is any, use Acrylic putty.
• Once that is done, wash and clean the region. If there is any loose debris on it, remove it immediately. When you apply the wall putty, the surface should be clean and smooth.
• Now, apply the wall putty carefully. Make sure you follow the instructions on the tub the putty comes in. You must also focus on the type of material being used. If it’s a powder type, let it sit for at least one day. Once it is ready, you can start painting it.
• As soon as the wall is ready, use a brush or a sponge to apply the paint to it.

Steps To Follow While Applying Wall Putty

Step 1- Before you begin, it is a good practice to sand the surface. With this, your putty will stick better on the walls. 

Step 2- If you find any hole or crack on the walls, use a thin wire or a screwdriver to eliminate the dirt and debris from it. 

Step 3– Start applying the putty from one corner to another neatly. So, you can easily avoid any wrinkles or bubbles on the wall putty. 

Step 4– The putty must be applied smoothly and evenly. Only then can you move ahead with the painting. 

Step 5– Now, put a second coat on the wall. 

Step 6- The blade knife you use for wall putty must be sharp enough to remove any excess putty from the wall. 

Step 7– Let it sit for at least one day. Once it dries up properly, move on to the next step. 

Step 8– Sand the surface once again. This will help even out the surface perfectly before painting the walls. 

End Note

Focus on this guide the next time you want to apply wall putty on the walls of your home. Initially, you might be worried about carrying out the entire process all by yourself. However, follow every step carefully, and you will realize it is quite fun. Just remember to invest in a good quality wall putty to see the right results.